motorcycle led brake and tail lights – LED panel is a cutting-edge, ultra-thin, light source, providing lighting solutions for a variety of applications such as: architectural lighting, display lighting, retail lighting, interior lighting and light images. LED panels, can be obtained directly applied to the opal diffuser attached to the no ultra-thin light source with a simple graphical front panel images. Because LED film is really thin, it is possible to cut into different shapes and sizes that it opens up a whole new world of new light chances.
LED panel is a 8-mm thick plate of acrylic acid and high-brightness LED embedded to the edge of a station ring of light in the oil. To make sure the very best supply and light output, acrylic face is engraved with an LED light which reflects the outward appearance of fine lines show.
Etched traces of these differences, important differences between light among two main panels. Stripe blueprint for different etching carved because the model is personal, and matrix-specific panel has been reduced from the big board, which means that stripes LED matrix is used to define the size of the more special.
The other main difference is the high brightness LED light bar LED panel is to offer higher light output. In order to optimize the light output of LED lights on the back panel to make sure that all the available reflected light manifestation in front of the white backing paper. In both scenarios, with the support of the tail, together with traces etched reflector provides light from the LED board is easily the most intelligent and the most uniform lighting possible.
LED panels also provide energy-efficient lighting equipment, high-brightness light-emitting diode is a minimal energy consumption by the 12-volt DC power supply, which is easy and smart energy inverter and connectors. Light board is to maintain low price, because they are durable and higher quality parts to ensure the longest life expectancy estimated at more than 70,000 hours may be made into.
In order to make certain the LED’s lifetime is vital that they are sustainable management. The warmth generated by the light-emitting diode is a unique heat sink is installed in the category, consumption of heat from the LED from the back. LED lights at a matrix of alloy radiator panel angle bar is at one place, together with the other elements with a waterproof adhesive tape, sealing light panel. LED panel at the stripes onto the heat sink is truly the back of a metal frame and directing heat away from the LED panel and put also has a LED.
LED at a matrix LED panels can provide all sorts of colour temperature, RGB color shift in spite of all the light-emitting diodes. The RGB LED light wall colour change can be offered with a DMX controller, the direction of colour change and sequenced. LED lighting panel also provides an adjustable lighting controller device, enabling users the perfect environment for the complete control of the brightness of the lighting